If you don’t know what the IP address is you find this using the SADP tool. You will need to log into your camera through its IP address. Turn off the IR light on a Hikvision IP camera It’s better to physically disconnect the IR lights.
However, not all cameras support such features. You get the idea, once done the menu should disappear from the screen. Don’t forget to click through the Save&Exit to apply the settings.
Additionally, you can do other settings such as Threshold, Level, etc. Navigate via the little menu (UP-DOWN) to Smart Light and then click Iris + icon to enter the menu.īy default the light is AUTO but you can switch it OFF and it will turn off. Then you should see a few options popping on the screen as us Video Format, Exposure, etc. On the next window, on the right sight click the Iris + (serves as the button “Enter”) to access the OSD menu. The OSD menu allows us to access options on the camera that are controlled directly by the camera’s chipset (one of being the IR LED lights). Well, the camera doesn’t have to be a PTZ type but this the way how you bring up the OSD menu (On-Screen Display). At the bottom of the screen, you should click the “PTZ Control” button as shown below. Go to the DVR screen and bring the camera on full-screen. After that, the IR lights won’t be able to power on.Īnother way to turn off the IR lights is to access the settings of the camera and turn it off there. The cable type is shown in the picture below.
To turn off the IR block in these cameras is very easy.Īll you have to do is to open up the camera (dome or bullet style), locate the IR block, track the cable powering the IR lights, and disconnect it from the motherboard. The Hikvision TVI cameras are HD cameras that run over coax cables, sometimes these types of cameras are called HD over coax cameras (they’re not IP cameras). Turn off the IR light on a Hikvision TVI camera Basically, you need to disable the options on the settings.
Analog fanuc ir vision camera how to#
This article shows how to turn off the IR lights for both HD analog camera and Hikvision IP camera. You don’t really need the camera’s white lights turned on indoor since if someone is inside they’ll turn the lights on. Let’s say you have enough light at your location and the IR is messing up the picture, in that case, you may need to manually turn off the infrared block.Īnother situation is if the camera is actually installed indoors. In certain circumstances, you may need to turn off the IR lights on your Hikvision camera.